Regardless of whether you are a fan of the Tri-Five Chevys, the1950s Impalas, the 1970s El Caminos, the pickup trucks of the 1950s or the Nova, when you restore your vehicle, you want to do it right. H&H Classic can help you with your classic Chevy restoration project because they carry parts for all of these years and vehicles. This hush mat kit is designed to take all of the noise out of the cabin of your vehicle. It is a deadening, thermal insulation that absorbs sound and provides a heat barrier between you and the vehicle.
This is a 12×23 30-piece bulk kit that reduces noise by over 50 percent. It will fit all models of the 1955 through 1957 Bel Air, 210 and 150, all models of the 1955 through 1972 Chevy or GMC trucks, all models of the 1958 through 1970 Impala, Caprice, Bel Air, Del Ray or Biscayne, all models of the 1964 through 1972 Chevelle, Malibu or El Camino and all models of the 1962 through 1974 Nova or Chevy II. It has been manufactured by Hush Mat USA who has been manufacturing sound reduction mats for over 25 years.
When you redo the interior of your vehicle, you want to add a new set of mats in order to make the ride the quietest possible. H&H Classic offers you a large selection and low prices on their classic Chevy parts. They also have fast shipping and easy returns. http://hhclassic. com/i-15146360-door-glass-assembly-lh. html The 1966 and 1967 Chevy Nova were the only two years in the second generation of Novas that spanned five generations. These years were restyled with a sharper edge to them than previously, and they had a fastback roof and a large, bold grille.
The SS model is a very popular model on the streets and the show circuit, so when you hotrod your Nova, make sure that you replace any broken or pitted glass. H&H Classic has classic Chevy parts. The door glass provides a barrier and protection from the weather. If you have a door glass that has been broken or is in poor shape, then you need to replace it when you finish your vehicle. You can make it show ready by replacing all of the glass in it. This is the door glass assembly for the 1966 or 1967 Chevy Nova or Chevy II.
It fits the 2-door hardtop model left side door and is a complete assembly. It has been manufactured by Dynacorn who specialize in hotrod body restoration parts. They supply bright trim, sheet metal and molding parts for the muscle car circuit since 1984. When you restore your car to showroom quality, you need replacement glass that will make it look like it just came from the factory. You can ask for our free technical assistance from our experienced staff if you have any questions about this part or other Nova parts.
We have a large selection and low prices on our classic Chevy parts. http://hhclassic. com/i-15146361-door-glass-assembly-rh. html The Chevy Nova spanned for five generations, but the second generation consisted of the 1966 and 1967 Nova that has proven to be extremely popular among car enthusiasts. These cars were restyled with a fastback roofline and a bold grille for a dynamic look. The SS added power to those looks and are still found on the local streets and the car shows. When you replace parts on your Nova, be sure to replace any damaged or worn glass.
H&H Classic can help you restore your car. The interior of your vehicle is protected from the outside weather by the glass. An old door glass may be pitted or cracked, so you need to replace it when you do your restoration. This door glass assembly is a complete kit that fits right-hand door of the 1966 and 1967 2-door hardtop Nova or Chevy II. It is manufactured by Dynacorn who are widely recognized for their muscle car replacement parts like sheet metal parts, trim and molding pieces. They have been supplying car enthusiasts with replacement parts since the early 1980s.
If the glass on your Nova is cloudy or cracked, then replace it. We have free technical assistance from our experienced staff available to you if you have any questions. Order from our large selection and low prices and start your restoration project today. http://hhclassic. com/i-13720614-front-lower-quarter-panel-section-rh. html When General Motors created the 1957 Chevrolet Bel Air, 150 and 210, they offered a hood design featuring a twin rocket, larger tailfins and lots more chrome. They added a tri-color paint option and your choice of seven V8 engines.
These immensely popular classic Chevys have become a staple of the car show and the movie screen. As you restore your vehicle, make sure that you include new sheet metal on parts that may have been damaged or rusted. H&H Classic carries restoration parts for your hotrod. The quarter panel helps protect the edge of the trunk and the wheel from damage. It is used to stabilize the vehicle and offers both function and appearance. This part can become damaged because its primary job is to take a hit. It is also subject to rust because road debris, salt and water can all chip or crack the paint on it.
This replacement quarter panel is a USA made sheet metal section that fits the right side of the 2-door 1957 Chevrolet Bel Air, 150 or 210. It has been manufactured by Cars who specializes in replacement parts for classic and muscle cars. When you do your restoration work, make sure that you replace any worn out metal parts on your car. If you have any questions about this part or any other parts for your 1957 Chevy, ask for our free technical assistance from our experienced staff.
In addition, we offer fast shipping and easy returns on our parts and accessories. ttp://hhclassic. com/i-13693064-complete-side-molding-clip-set. html 1958 was the first generation of the Impala, and they came on the scene as a top trim package for the Bel Airs. They had a longer wheelbase and brushed aluminum trim. They were low slung and sleeker with a sculpted rear fender and three taillights on each side. They had rocker moldings that were bright and dual headlamps. They were just as popular then as they are today, and when you customize your Impala, you want to replace worn out trim. H&H Classic can help.
The trim on this sportier package was one of the selling points, and it is that trim that is so eye-catching. When you replace any damaged trim, you need clips to hold it in place. This is a complete molding clip set that is correct for the moldings on the 1958 2-door Impala. Without the clips, the molding will not stay in place. These clips are manufactured by H&H Classic Parts who specialize in replacement parts and accessories for classic Chevys. H&H Classic Parts was started in the late 1980s by the Smith family who have been in the automotive parts industry since the early 1970s.
They are committed to offering car lovers the best part at the best price with the best shipping. When you have any questions about your Impala parts, our free technical assistance from our experienced staff is only a phone call away. We also have a large selection and low prices on all of our Impala parts and accessories. http://hhclassic. com/i-13702920-lower-cowl-panel. html Between 1970 and 1972, GM offered some sleek muscle cars like the Chevelle, Malibu and the El Camino. They were built with sleek lines and a lot of horsepower, and those features are part of the reason that they are so popular even today.
When you do any restoration work on your hotrod Chevy, be sure to replace old sheet metal and other parts that are prone to rust. H&H Classic carries classic Chevy parts for your project. The lower cowl area helps to protect the underside of the vehicle from damage and helps to keep the underside clean. This part tends to rust out fairly easily, so when you do a show car, you want to replace it with new sheet metal. This lower cowl fits on the firewall on all models of 1970 through 1972 Chevrolet Chevells, Malibus and El Caminos. It is made by Dynacorn.
Dynacorn has been manufacturing replacement parts for hotrods and muscle cars since the early 1980s. They specialize in new tooling, so there are no older relatives to their parts. Every part is designed from the best raw sources they can get, so you get a clean look fitting your show car. H&H Classic is happy to answer any questions you may have about this part or others. We offer free technical assistance from our experienced staff. We also have fast shipping and easy returns. http://hhclassic. com/i-13710684-side-glass-set-8-pc-tinted. html
When General Motors rolled the first 1955 Chevrolet out, there was no way that they could know how these cars along with the 1956 and 1957 cars would become the cult classic that they are today. Even then, they were sought out because they were both economical and powerful. Hotrodders recognized their potential immediately, and if you are restoring one of these pieces of Americana, then you want to replace old glass that may be damaged. H&H Classic carries classic Chevy parts. The glass on your Tri-Five can become pitted, cracked or broken during storage, and when you get these cars ready for a car show, you need to replace the glass.
This is an 8-piece glass set that includes the glass for four doors, two vent windows and two quarter windows. It has been manufactured with the correct glass coloring, so it is true to the original. This kit fits 1955 through 1957 4-door Bel Air, 210 and 150 models. It has been manufactured by H&H Classic Parts who specialize in reproduction parts for classic Chevys. H&H Classic Parts is family-owned and –operated by the Smith family and has been in business since the late 1980s. They offer the best parts for the best prices and the fastest shipping.
If you have any questions about this or any other Chevy part, then ask for our free technical assistance from our experienced staff. We have a large selection and low prices on all of our parts and accessories. http://hhclassic. com/i-13696793-aluminum-radiator. html The 1961 through 1963 Chevrolet Impalas were part of the third generation of Impala. They were designed with a long, sleek profile and offered panoramic views from the large windows. General Motors gave them a lot of horsepower for the hotrod enthusiast, and it was not long before these cars were part of the muscle car scene.
The 409 is an iconic engine, and when you rebuilt or restore your Impala, make sure that you replace worn out parts like the radiator in order to get the best performance from those engines. H&H Classic can help you with your restoration project. The radiator holds the water and the coolant mixture that your engine needs in order to keep it cool while running. The radiator is metal, so it is subject to rust and corrosion over time. This Desert Cooler aluminum radiator is designed with core of two row one tubes on 3/8-inch centers. The all-aluminum cores have no epoxies or glues added to them.
They offer the same heat transfer as any other two-row aluminum radiator available. This radiator fits all models of the 1961 through 163 Impala, Bel Air or Biscayne with an automatic transmission. It has been manufactured by H&H Classic Parts who specialize in restoration parts for classic Chevys. They offer the best parts for the best prices with the fastest shipping. Family-owned and –operated, they have been in business since the late 1980s. We have fast shipping and easy returns on all of the Impala parts in our large selection and low prices.